King Plasti-Bal® is a solid high-density polyethylene sheet that’s heavy-duty, waterproof, aesthetically attractive, graffiti resistant, easy to clean, partition board designed for commercial architectural applications.
Now Available for Upgrade with King FlameShield for our ASTM E-84 Class A or B Flame/Smoke Compliance and CAN/ULC-S102 for Canadian Compliance
King Plasti-Bal® is a heavy-duty, waterproof, aesthetically attractive, graffiti resistant, easy to clean, high-density polyethylene sheet designed for commercial architectural applications as well as other various industrial applications. Plasti-Bal® is offered in seventeen colors in matte gloss finish. Also available upon request are two designer textures.
Sheet Sizes: (in) Approximate weight:(lbs) Standard Gauge: (in) Sheet Sizes: (mm) Approximate Weight: (kg) Standard Gauge: (mm) *All values are determined on specimens prepared according to ASTM Standards.
*Note: These images illustrate the various color. Due to the wide variances in computer monitors and printers, King Plastic Corporation does not recommend using these graphics for color matching purposes. Please contact your distributor for details.
1 point: MR Credit 2.2 Sustainable 2 points: MR credit 4.2 Recycled Content 2 points: MR credit 4.2 Recycled Content .5 point: MR credit 2.2 Environmentally 2 points: MR Credit 4.2 Recycled Content 1 point: MR Credit 5.2 Furniture & Medical 1 point: MR Credit 5.3 Furniture & Medical
Protect Your Interests with E-84 Class A or B Flame Rated Polymer Sheets from King Plastic Corporation The ASTM E84 This test method is intended to compare the surface flame spread and smoke developed measurements to those obtained from the tests of mineral fiber cement board and select grade red oak flooring. The results are expressed as Flame Spread Index and Smoke Developed Index. Results Class B Interior Finish:
All of the Plasti-Bal® colors are green, which will let you qualify for LEED® rating points with this latest HDPE polymer sheet solution from King Plastic Corp.
Plasti-Bal® is made entirely of FDA approved materials.
King Plasti-Bal® may be upgradable with our exclusive antimicrobial additive King MicroShield®, the latest technology for protecting the product surface against a broad spectrum of damaging bacteria, algae, and fungi by reducing the amount of microbes by 99.99% and killing the microbes on contact. See our King MicroShield® page for more information.
King Plasti-Bal® is also available for upgrade with our King FlameShield for E-84 Class A/Class B flame/smoke protection.
General Applications:
1″ x 55.5″ x 144″
270 lbs
(.950″ – .999″) Both width and length Plus Only at room temperature
25.4mm x 1409.7mm” x 3657.6mm
122.5 kg
24.13 mm – 25.4 mm
Properties
Units
ASTM
Plasti-Bal®
Density
g/cc
D1505
.96
Tensile Strength @ Yield
psi
D638
>4100
Tensile Modulus
psi
D638
255,000
Elongation @ Yield
%
D638
9.8
Elongation @ Break
%
D638
>600
Flexural Modulus
psi
D790
185,000
Flexural Stress @ 5% Strain
psi
D790
3,810
Compressive Properties 10% Strain
psi
D695
4,950
Durometer
Shore D
D2240
68
Tensile Impact
ft.lbs./in.2
D1822
115
Izod Impact Resistance
ft.lbs./in.2
D256
1.1
Brittleness Temp.
ºF
D746
<-105º
Vicat Softening
ºF
D1525
253º
Heat Deflection Temp. 66 psi
ºF
D648
167º
Screw and Nail Withdrawl
lbs
D1761
657 & 63
Flammability
Rating
UL94
HB
Nominal values should not be interpreted as specifications.
King Plasti-Bal® is made entirely from FDA and USDA approved materials.
King Plasti-Bal® meet ASTM 4976 PE235
RoHS Statement
Standard Colors:
Adobe, Basin Blue, Berry, Brownstone, Deckhand Grey, Ebony, Emerald Blade, Greenstone, Island Sand, Parchment, Sierra Brown, Teton Red, Wedgewood, Whale Grey
Premium Colors:
Taupe Speckletone, Quartz Speckletone, Rain Drop, 
LEED for Existing Buildings,
September 2008
Purchasing: Durable GoodsLEED for New Construction,
Version 2.2LEED for Commercial Interiors,
Version 2.0
1 point: EQ credit 4.5, Low-Emitting materialsLEED for Homes,
January 2008
Preferable ProductsLEED for Schools,
First Edition, November 2007Green Guild for Health Care,
Version 2.2
Furnishings: Materials
Furnishings: Manufacturing, Transportation
and Recycling
Available in King Plasti-Bal®
Class A Interior Finish:
Flame Spread Index 0-25, Smoke Developed Index 0-450. Includes any material classified at 25 or less on the flame spread test scale and 450 or less on the smoke developed test scale. Any element thereof when so tested shall not continue to propagate fire.
Flame Spread Index 26-75, Smoke Developed Index 0-450. Includes any material classified at 25 but not more than 76 on the flame spread test scale and 450 or less on the smoke developed test scale.
ASTM E84 Class A Certification| ASTM E84 Class B Certification
