King CuttingBoard® XL
Is Especially useful in the production of larger one-piece boards that must weigh less
than 50 pounds to conform with NFS regulations. Live safer.
King CuttingBoard® XL is an exceptionally white natural polyethylene color, creating the bright, clean, sanitary look that commercial food processing operations require. Scrub the material with a strong bristle brush and professional strength detergent to remove any detritus or stains. Rinse with hot water. Sanitize with a ten percent bleach solution. Rinse thoroughly with cold water. King CuttingBoard® XL materials are dishwasher safe. Remove from the dishwasher before the drying cycle for the best result. Allow to air dry.
Standard Sheet Sizes: (in) Standard Gauge: (in) Standard Weight: (lbs) Standard Gauge: (mm) Standard Sheet Sizes: (mm) Standard Weight: (kg) Custom sizes and thickness are available. Tolerance information: Gauges ± 5%, both width and length Plus Only at room temperature.
*All values are determined on specimens prepared according to ASTM Standards. Nominal values should
The sheets are approximately one-third lighter in weight than standard King CuttingBoard®, allowing for easy handling and cleanup. Bacteria, odors and cleaning fluids wash completely off. King CuttingBoard® XL won’t dull knives like wood. King CuttingBoard XL is tested and certified by the NSF and the material is FDA approved. It is made to last in the most demanding commercial environments. It is easy to clean, easy to maintain, and will not rot or splinter.How to Clean
60″ x 96″ – 60″ x 120″
1/4″ | 1/2″ | 3/4″ | 1″
60″ x 96″
40 lbs | 80 lbs | 120 lbs | 158 lbs
60″ x 120″
50 lbs | 100 lbs | 150 lbs | 247 lbs
6.35mm | 12.7mm | 12.7mm | 19.05mm
1219mm x 2438.5mm | 1524mm x 3048mm
1219mm x 2438.5mm
18kg | 36kg | 54kg | 72.5kg
1524mm x 3048 mm
22.6kg | 45kg | 68kg | 90.7kg
Chemical Resistance | NSF website
Properties
Units
ASTM
CuttingBoard XL
Density
g/cc
D1505
.77
Tensile Strength @ Yield
psi
D638
>4,100
Tensile Modulus
psi
D638
165,000
Elongation @ Yield
%
D638
9.6
Flexural Modulus
psi
D790
130,000
Flexural Stress @ 5% Strain
psi
D790
2,990
Compressive Properties 10% Stain
psi
D695
2,910
Durameter
Shore D
D2240
65
Izod Impact Resistance
ft lbs/in2
D256
1.4
Heat Deflection Temp.
66p.s.i.ºF
D648
188º
Screw & Nail Withdrawl
lbs
D1760
489 & 43
not be interpeted as specifications.
King CuttingBoard® XL is made entirely from FDA approved materials.
King CuttingBoard® XL also meets NSF guidelines.
Opaque White
