A King Performance Commodity
King KPC Polypropylene products offers excellent chemical resistance.
It resist organic solvents, de-greasing agents and electrolytic products.
King KPC Polypropylene is produced with our proprietary K-Stran® process for unsurpassed flatness and quality up to 1” in thickness. Standard Sheet Sizes: (in) Standard Gauge: (in) Standard Sheet Sizes: (mm) Standard Sheet Gauges: (mm) Weight: (kg) Tolerance Information: Gauge – 1/8″ through 1″ is +/- 5% Standard Block Sizes Standard Gauge: (Inches) * All values are determined on specimens prepared according to ASTM Standards.
For larger gauges our state-of-the-art compression molding system is utilized to create the same quality sheets, slabs and massive shapes.
King KPC Polypropylene offers excellent resistance to chemicals, organic solvents, de-greasing agents, and electrolytic products. It also has outstanding stain resistance with low moisture absorption. King KPC Polypropylene has exceptional impact resistance at room temperature, with good physical properties, low specific gravity, and is stiffer than LDPE or HDPE. King KPC Polypropylene (PP) offers a good balance of thermal, chemical and electrical properties with moderate strength. It possesses a good strength to weight ratio. Because it has such a hard, high gloss surface, polypropylene is ideally suited to environments where there is concern for bacteria build up that can interfere with flow.
King KPC Polypropylene has good insulating properties. Its excellent arc resistance and dielectric strength allows polypropylene to be used extensively in electrical application. It can also be modified to be conductive or antistatic.
King KPC Polypropylene uses FDA approved materials, and is tested and certified by NSF, which makes it a good material candidate for professional food services, containment and operations. Other uses for KPC Polypropylene are larger span applications, filter presses and die-cutting surfaces.
48” x 96”
Custom Sizes Available
1/8″| 3/16″ | 1/4″ | 3/8″ | 1/2″ | 3/4″ | 1″ | 1-1/4″ |1-1/2″ | 2″
Custom Thickness Available
19 | 28 | 38 | 56 | 75 | 113 |150 | 188 | 225 | 300
1219mm x 2438mm
3.175 mm | 4.76mm | 6.35 mm | 9.525 mm | 12.7 mm | 19.05 mm | 25.4mm | 31.75 mm | 38.1 mm | 50.8mm
8.6 kg | 12.7 kg | 17 kg | 25 kg | 34 kg | 51 kg | 68.04kg | 85.28 kg | 102.06 kg | 136.08 kg
Gauge – Above 1″ is +/- 10%
Purchase in 1 sq. ft. multiples or by 24″x 48″ Blocks
2-1/2″ | 3″ | 3-1/2″ | 4″ | 5″ | 6″ | 7″ | 8″ | 9″ | 10″ | 12″
Tensile Strength @ Yield
Tensile Strength @Break
Elongation @ Yield
Elongation @ Break
Notched Izod Impact
Unnotched Izod Impact
Nominal values should not be interpreted as specifications.
King KPC Polypro is made entirely from FDA materials and is tested and certified by NSF.
King KPC Polypropylene is produced with our proprietary K-Stran® process for unsurpassed flatness and quality up to 1” in thickness.
Standard Sheet Sizes: (in)
Standard Gauge: (in)
Standard Sheet Sizes: (mm)
Standard Sheet Gauges: (mm)
Gauge – 1/8″ through 1″ is +/- 5%
Standard Block Sizes
Standard Gauge: (Inches)
* All values are determined on specimens prepared according to ASTM Standards.