King PipeGrade® is a special black polyethylene material for the pipe industry.
It is available in sheets, slabs, and massive shapes.
King PipeGrade® is a special black polyethylene material for the pipe industry. It is available in sheets, slabs, and massive shapes.
King PipeGrade® is now offering PE 4710 – PE 100 material, which is compliant to ASTM 3350 as a standard material. ASTM 3350/4710 PE100 is completely compatible and 100% interchangeable for use in applications that presently use ASTM 3603 – PE 80 material. King PipeGrade® is FDA and NSF Standard 14 certified and complies with ANSI/NSF Standard 61 to be used in potable water piping systems
PE 4710- PE 100 tends to have a higher hydrostatic design basis (HDB) than other resins but most significantly is the notched tensile/slow crack PENT test which is > 10,000 hours vs. 100-200 hours for others.
50 – 100 years service life per ISO CRS 10 MPa @ 20º C.
- Pipe flanges
- Gas lines
- Water mains
Standard Sheet Sizes: (in)
1/8″ to 1-1/2″: 48″ x 96″ | 60″ x 120″
1-1/2″ to 4″: 48″ x 96″
Custom Sizes: Please Inquire
Standard Gauge: (in)
48″ X 96″ | 60″ x 120″
1/8″ | 3/16″| 3/8″ | 1/2″ | 5/8″ | 3/4″ | 1″ | 1-1/4″ | 1-1/2″
1-3/4″ | 2″ | 2-1/4″ | 2-1/2″ | 2-3/4″ | 3″ | 3-1/2″ | 4″
60″ x 120″
3/16″ | 1/8″ | 3/8″ | 1/2″ | 5/8″ | 3/4″ | 1″ | 1-1/4″ | 1-1/2″
Standard Weight (in)
48″ x 96″
20 lbs | 22 lbs | 61 lbs | 82 lbs | 102 lbs | 122 lbs | 163 lbs | 204 lbs
245 lbs | 285 lbs | 326 lbs | 367 lbs | 448 lbs | 489 lbs | 571 lbs | 652 lbs
60″ x 120″
32 lbs | 48 lbs | 96 lbs | 127 lbs | 159 lbs | 191 lbs | 255 lbs | 318 lbs | 382 lbs
Custom Sizes: Please Inquire
Tolerance information:
Gauge 1/8″ through 1″ is ± 5%, both width or length is Plus Only at room temperature
Gauge greater than 1″ through 1-1/2″ is -5% +10%, both width and length is Plus Only at room temperature
Gauge greater than 1-1/2″ is Plus Only, both width and length is Plus Only at room temperature
Chemcial Resistance
| Properties | Units | ASTM | Nominal Values |
| Density | g/cc | D1505 | .96 |
| Tensile Strength @ Yield | psi | D638 | 3,360 |
| Tensile Strength @ Break | psi | D638 | >5,500 |
| Elongation @ Break | % | D638 | 600 |
| Flexural Modulus 2% secant | psi | D790 | 150,000 |
| Notched Izod Impact | ft.lbs./in.2 | D256 | 9.2 |
| Brittleness Temperature | ºF | D746 | -180º |
| Vicat Softening Temperature |
ºF | D1525 | 259º |
| Environmental Stress Crack Resistance | hrs | D1693C | >5000 |
| Notch Tensile (PENT) |
hrs | F1473 | >10,000 |
All values are determined on specimens prepared according to ASTM Standards. Nominal values should not be interpreted as specifications.
King PipeGrade® PE-100 complies with the Plastic Pipe Institute PE4710 classification
King PipeGrade® PE-100 meets ASTM D3350 cell class 445574C
PE-100 Pipegrade is FDA and NSF Standard 14 certified and complies with ANSI/NSF Standard 61
King Pipegrade Physical Properties| King PipeGrade MSDS
Black
