The advantage of King KPC ABS is that this material combines strength and rigidity of the acrylonitrile and styrene polymers with the toughness of the polybutadiene rubber. A variety of modifications have been made to improve impact resistance, toughness and heat resistance. The impact resistance does not fall off rapidly at low temperatures and stability under load is excellent with limited loads. KPC ABS is considered superior for its hardness, gloss, toughness, and electrical insulation properties. KPC ABS is easily machinable and available in smaller sizes.  It is extensively used in prototyping, the modeling industry and other mechanical applications.

A growing outlet for ABS is the electronics industry where it is used in business machines, computers, radios, monitors and cell and smart phones. An important market is the automobile sector where it is used in instrument panels, consoles, radiator grills, headlight housings and interior trim parts with growing use in recreational vehicles.

Other applications include domestic appliances such as refrigerators and sewing machines; pipes, fittings and other products used in the construction industry; and recreational goods such as boats and mobile homes.

King KPC ABS is manufactured in our state-of-the-art compression molding system located in North Port, Florida.

Where to Buy


Standard Sheet Size

Black and Natural: 24″ x 48″ and 48″ x 96″, gauges starting at 1/16″
 48″ x 96″ only, gauges starting at 3/8″ up to 4″

in: 24″ x 48″ 48″ x 96″
mm: 610mm x 1219mm 1219mm x 2438mm

Standard Gauges

in: 1/16″ 1/8″ 1/4″ 3/8″ 1/2″ 5/8″ 3/4″ 1″
mm: 1.5875mm 3.175mm 6.35mm 8.81mm 12.7mm 15.87mm 19mm 25.4
in: 1-1/4″ 1-1/2″ 1-3/4″ 2″ 2-1/4″ 2-1/2″ 3″ 4″
mm: 31.75 38.1 38.1mm 44.45mm 50.8mm 57.15mm 76.2mm 101.6mm

Approximate Weight per sq. ft.

lbs: 0.337 lbs 0.675 lbs 1.35 lbs 2 lbs 2.7 lbs 3.4 lbs 4.1 lbs 5.4 lbs
kg: 0.153kg .306kg .612kg .907kg 1.224kg 1.54kg 1.85kg 2.45kg
lbs: 6.75 lbs 8.1 lbs 9.5 lbs 10.8 lbs 12.15 lbs 13.5 lbs 16.2 lbs 21.6 lbs
kg: 3.06kg 3.67kg 4.3kg 4.89kg 5.51kg 6.12kg 7.35kg 9.8kg

Tolerance Information:

Compression Molding

Gauges 1/16” through under 1-1/2” ± 10% | Gauges 1-1/2” and greater plus only | Length and width plus only at room temperature

Custom gauges available upon request


Physical Properties
Units ASTM Nominal Values
Black/Natural ABS
Nominal Values
White ABS
Density g/cc D1505/D792 1.03 1.04
Tensile Strength @ Yield psi D638 >6,000 >6,400
Elongation @ Break  % D638 40 24
Flexural Modulus psi D790 300,000 333,000
Flexural Strength psi D790 10,700 9,430
Durometer R Scale D785 102 103
Izod Impact ft.lbs./in. D256 7.7 5.6
Vicat Softening Temp. ºC (ºF) D1525 104ºC (219ºF) 99ºC (210ºF)
Heat Deflection Temp.
66 psi
ºC (ºF) D648 94ºC (201ºF) 97ºC (206ºF)
Flammability Rating UL94 HB  HB

*All values are determined on specimens prepared according to ASTM Standards.
Nominal values should not be interpreted as specifications.
King KPC ABS Black is made entirely from FDA approved materials.
King KPC ABS Natural is made entirely from FDA approved materials.
King KPC ABS White is made entirely from FDA approved materials.

King KPC ABS Black/Natural/White does not contain any or the 29 substances of very high concern based on the European Chemical Agency.
King KPC ABS Black/Natural/White are RoHS Complaint.


Additional Information

Physical Properties

ABS has good chemical and stress cracking resistance to inorganic salt solutions, alkalis, acids, and some oils.
ABS also has excellent abrasion resistance, electrical properties, moisture and creep resistance.