Description

King KPC high-density polyethylene more commonly referred to as King KPC HDPE is produced with our proprietary K-Stran™ process for unsurpassed flatness and quality up to 1-1/2” in thickness. For larger gauges our state-of-the-art compression molding system is utilized to create the same quality sheets, slabs and massive shapes. King KPC HDPE natural is FDA, USDA and FPA approved material that can be used for food containers and food equipment.* It is extremely versatile with outstanding properties and good chemical resistance for a wide variety of applications at a very competitive cost. King KPC HDPE has a low coefficient of friction and can be easily cut, machined, welded, and thermoformed for easy fabrication. It may be used for some structural fabrication because of its superior tensile strength. It is moisture resistant, impact resistant and has great abrasion resistance. The material will not splinter or rot; resists stain and odor causing bacteria; and is very resistant to cleaning agents. For best cleaning results refer to Chemical Resistance Chart.

King KPC HDPE is upgradable to King MicroShield® with an exclusive antimicrobial additive from Biosafe®, the latest technology for protecting the product surface against stain and odor causing bacteria, algae and fungi.*

King KPC HDPE is upgradable with King FlameShield, for ASTM E-84 Class A or B Flame/Smoke Compliance and CAN/ULC-S102 for Canadian Compliance.

For more information about King MicroShield and King FlameShield, please visit those product pages.

Disclaimer: King MicroShield® may affect color. King FlameShield may affect finish and color.

*Disclaimer: This product does not protect users or others against foodborne bacteria. Always clean this product thoroughly after each use.

Find a Distributor


Active ingredient (Biosafe®)………………….antimicrobial siloxane EPA Reg. No. 83019-1

*For bacteriostatic, fungistatic, & algistatic properties. This product is exempt from registration under 40 CFR 152.25(a). King MicroShield® effectiveness verified by ISO and ASTM standards. This product does not protect users or others from disease-causing bacteria. Always clean this product thoroughly after use.

Biosafe® is a registered trademark of BIOSAFE, Inc.: Patent number 7,851,653 and 7,858,141.

Specifications

Standard Sheet Size

in: 48″ x 96″
mm: 1219″ x 2438″

Standard Gauges

in: 1/8″ 3/16″ 1/4″ 3/8″ 1/2″ 5/8″ 3/4″ 1″
mm: 3.18mm 4.76mm 6.35mm 9.53mm 12.7mm 15.88mm 19.05mm 25.4mm
in: 1-1/4″ 1-1/2″ 1-3/4″ 2″ 2-1/4″ 2-1/2″ 3″ 4″
mm: 31.75mm 38mm 44.75mm 50.8mm 57.15mm 63.5mm 76.2mm 101.6mm

Approximate Weight

lbs: 20 lbs 30 lbs 40 lbs 60 lbs 80 lbs 100 lbs 120 lbs 160 lbs 200 lbs
kg: 9kg 13.6kg 18kg 26kg 32kg 45kg 54.4kg 72.5kg 90.7kg
lbs: 240 lbs 280 lbs 320 lbs 360 lbs 400 lbs 480 lbs 640 lbs
kg: 109kg 127kg 145.15kg 163.29kg 181.43kg 217.7kg 290kg

Tolerance Information:

K-Stran™
Gauges 1/8” through 1-1/2” is ± 5% | Length and width plus only at room temperature

Compression Molding
Gauges greater than 1” and under 1-1/2” is ± 10% | Gauges 1-1/2” and greater plus only | Length and width plus only at room temperature

Custom thickness up to 25″/635mm with our King Size Blocks and Massive Shapes

Custom sheet sizes, gauges, and colors available

Physical Properties

Properties

Units

ASTM

Nominal Value

Density g/cc D1505 0.96
Tensile Strength @ Yield psi D638 >4100
Tensile Modulus psi D638 255,000
Elongation @ Yield % D638 9.8
Elongation @ Break % D638 >600
Flexural Modulus psi D790 185,000
Flexural Stress @ 5% Strain psi D790 3,810
Compressive Properties 10% Strain psi D695 4,950
Durometer Shore D D2240 68
Tensile Impact ft.lbs./in.2 D1822 115
Izod Impact Resistance ft.lbs./in.2  D256 1.1
Brittleness Temp. ºC (ºF) D746 <-76ºC (<-105ºF)
Vicat Softening Temp. ºC (ºF) D1525 123ºC (253ºF)
Heat Deflection Temp @66 psi ºC (ºF) D648 75ºC (167ºF)
Screw & Nail Withdrawal lbs D1761 657 & 63

All values are determined on specimens prepared according to ASTM. Nominal values should not be interpreted as specifications.
King KPC HDPE is made entirely from FDA and USDA approved material.
King KPC HDPE meets ASTM D4976.

Colors