King CuttingColors® is a NSF-certified family of color-coded
cuttingboard sheets in five different industry-standard colors
to help combat cross-contamination.
King CuttingColors® is family of color-coded cutting board sheets in five different industry-standard colors to help combat cross contamination. Scrub the material with a strong bristle brush and professional strength detergent to remove any detritus or stains. Rinse with hot water. Sanitize with a ten percent bleach solution. Rinse thoroughly with cold water. King CuttingColors® materials are dishwasher safe. Remove from the dishwasher before the drying cycle for the best result. Allow to air dry.
Standard Sheet Sizes: (in/mm) Standard Gauge: (in/mm) Standard Weight: (lbs/kg) Tolerance information: Gauges ± 5%, both width and length Plus Only at room temperature. Chemical Resistance | NSF website
*All values are determined on specimens prepared according to ASTM standards. Nominal
*Note: Color accuracy can vary considerably on computer monitors and printers. Please consult your distributor for a product sample before making critical color choices. Specialty colors by special order only.
A textured matte finish and solid surface provide a stable and sanitary work area. It is available in large sheets that can be cut to fit most counter tops. Bacteria, odors and cleaning fluids wash completely off. King CuttingColors® won’t dull knives like wood. It is produced with the same FDA materials and and is tested and certified by the NSF, helping you live safer.How to Clean
48″x 96″/1219mm x 2438mm
1/2″ | 3/4″ / 12.7mm | 19mm
80 lbs| 120 lbs / 36 kg | 54.4 kg
Properties
Units
ASTM
CuttingColors
Density
g/cc
D1505
.96
Tensile Strength @ Yield
psi
D638
>4100
Tensile Modulus
psi
D638
225,000
Elongation @ Yield
%
D638
9.8
Elongation @ Break
%
D638
>600
Flexural Modulus
psi
D790
185,000
Flexural Stress @ 5% Strain
psi
D790
3,810
Compressive Properties 10% Strain
psi
D695
4,950
Durometer
Shore D
D2240
68
Tensile Impact
ft.lbs./in.2
D1822
115
Izod Impact Resistance
ft.lbs./in.2
D256
1.1
Brittleness Temp.
ºF
D746
<-105º
Vicat Softening
ºF
D1525
253º
Heat Deflection Temp. 66 psi
ºF
D648
167º
Screw and Nail Withdrawl
lbs
D1761
657 & 63
Flammability
Rating
UL94
HB
values should not be interpreted as specifications.
This product meets all requirements for the FDA for olefin polymers to be used as articles
or components of articles for contact with food as set forth in 21 CFR 177.1520.
King CuttingColors® also meets NSF guidelines.
Red for Raw Meat, Blue for Seafood, Green for Vegtables, Yellow for Poultry, Tan for Cooked Meat
